Welcome to Downriver Tools

3/8″ Gang-Tooling Tool Post

More Views

3/8″ Gang-Tooling Tool Post
Part #97-5930

Availability: In stock

3/8″ Gang-Tooling Tool Post (tools not included, shown for reference only)



About the 3/8″ Gang-Tooling Tool Post

We designed our gang-tooling tool post specifically for our customers who want to convert their Sherline lathe into a “Chucker Lathe” or gang-tooling lathe. This tool post will also be the standard tool post that we offer with our CNC Chucker Lathe.

Our gang-tooling tool post offers a convenient and accurate way to hold up to four tools with a known centerline-to-centerline distance of 1.500″. This tool post has (4) 3/8″ holes to hold boring bars, drill chucks, or tool bushings with two locking screws for each tool.

For customers who want to use ER16 collet holders with a 5/8″ shank, we offer P/N 5935 which is the same as this tool post except it has 5/8″ tooling holes.

Includes the following:

  • 3/8″ Gang-Tool Post Body
  • 10-32 x 1″ SHC Screw (3)
  • Extended Tool-Post T-Nut (3)
  • 10-32 x 3/4″ SHC Screw (8)
  • #10 Washer (3)
  • Steel Dowel Pin 1/4″ x 3/4″ (2)

Considerations Regarding this Tool Post and Its Possible End Uses

There are many considerations regarding this tool post and its possible end uses. Please check the instructions for a complete list (click on the Instructions tab above to download the document). This tool post is designed to be used with our 13″ Mill Table (P/N 50180 or P/N 67050) in place of the lathe crosslide. Other recommended optional equipment includes P/N 1294 Riser Plate in order for your tools to be on centerline with the headstock spindle.

NOTE: While the gang-tooling tool post will mount on the 6″ and 8″ crosslides, its size renders it unusable on either of these crosslides.

Additional Information

Additional Information

Type N/A

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.