Welcome to Downriver Tools

3/8″ Gang-Tooling Tool Post

More Views

3/8″ Gang-Tooling Tool Post
Part #97-5930

Availability: In stock

3/8″ Gang-Tooling Tool Post (tools not included, shown for reference only)



About the 3/8″ Gang-Tooling Tool Post

We designed our gang-tooling tool post specifically for our customers who want to convert their Sherline lathe into a “Chucker Lathe” or gang-tooling lathe. This tool post will also be the standard tool post that we offer with our CNC Chucker Lathe.

Our gang-tooling tool post offers a convenient and accurate way to hold up to four tools with a known centerline-to-centerline distance of 1.500″. This tool post has (4) 3/8″ holes to hold boring bars, drill chucks, or tool bushings with two locking screws for each tool.

For customers who want to use ER16 collet holders with a 5/8″ shank, we offer P/N 5935 which is the same as this tool post except it has 5/8″ tooling holes.

Includes the following:

  • 3/8″ Gang-Tool Post Body
  • 10-32 x 1″ SHC Screw (3)
  • Extended Tool-Post T-Nut (3)
  • 10-32 x 3/4″ SHC Screw (8)
  • #10 Washer (3)
  • Steel Dowel Pin 1/4″ x 3/4″ (2)

Considerations Regarding this Tool Post and Its Possible End Uses

There are many considerations regarding this tool post and its possible end uses. Please check the instructions for a complete list (click on the Instructions tab above to download the document). This tool post is designed to be used with our 13″ Mill Table (P/N 50180 or P/N 67050) in place of the lathe crosslide. Other recommended optional equipment includes P/N 1294 Riser Plate in order for your tools to be on centerline with the headstock spindle.

NOTE: While the gang-tooling tool post will mount on the 6″ and 8″ crosslides, its size renders it unusable on either of these crosslides.

Additional Information

Additional Information

Type No

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.